Trending

Answers

  • 0
  • 0

High Purity Tantalum Carbide TaC Powder Cas 12070-06-3, 99.9%

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Since 2022, Russia-Ukraine geopolitical conflicts have intensified, and global energy prices have risen sharply, with international natural gas prices hitting historic highs. As the most important transitional energy source in the transition from fossil energy to non-fossil energy, the share of natural gas in primary energy has increased from 14.6% in 1965 to 24.7% in 2020.  The global gas price indices showed a unilateral downward trend from 2018, bottomed out in 2020, and remained low for a long time. However, since July 2020, the global gas prices have gradually fluctuated upward, and the impact of geopolitical events made the Dutch TTF gas price even hit record highs repeatedly.

An analyst of a securities company believes that the core catalyst of this round of global gas market lies in the lack of investment in upstream oil and gas resources caused by long-term low prices. Since 2020, although the epidemic has led to a decline in demand, the decline in supply has been faster, resulting in a large inventory consumption. In 2021, demand will recover faster than supply (the supply-side is less sensitive to prices, which will be reflected in investment).  

As the world's two largest gas Tantalum Carbide powder are also expected to change significantly.

About Tantalum Carbide TaC Powder:
Tantalum carbide is a metallic cubic crystalline powder that forms a binary chemical compound family of tantalum and carbon. They are extremely hard, fragile refractory ceramic materials with metallic conductivity. They appear as brownish-gray powders and are usually processed by sintering. It belongs to the sodium chloride type cubic crystal system. At present, tantalum carbide is also used as a cemented carbide sintered grain growth inhibitor, which has a significant effect on inhibiting grain growth, with a density of 14.3g/cm3.
 
Tantalum carbide is insoluble in water, hardly soluble in inorganic acid, soluble in a mixed acid of hydrofluoric acid and nitric acid, and can be decomposed. Strong oxidation resistance, easily melted and decomposed by potassium pyrosulfate. Tantalum carbide has high electrical conductivity, with a resistance of 30Ω at room temperature, showing superconducting properties. Tantalum carbide can be used in powder metallurgy, cutting tools, fine ceramics, chemical vapor deposition, hard wear-resistant alloy tools, tools, molds, and wear-resistant and corrosion-resistant structural components to improve the toughness of the alloy. The sintered body of tantalum carbide is golden yellow and can be used as a watch decoration.
 
The bond between tantalum carbide and carbon atoms is a complex mixture of ions, metals and covalent contributions, and these carbides have very hard and brittle materials due to strong covalent components. For example, TAC has a microhardness of 1600-2000 kg/mm2 (~9μH) and an elastic modulus of 285gPa, and the corresponding values of tantalum are 110kg/mm2 and 186gPa. The carbon content in TAC increases hardness, yield stress and shear stress.
 
As an important cermet material, tantalum carbide is sometimes added to the tungsten carbide alloy when it is commercially used for cutting applications. Depending on the purity and measurement conditions, the melting point of tantalum carbide reaches its peak at about 3880°C. This value is the highest value among binary compounds. Only tantalum carbide ha can have a slightly higher melting point of about 3942°C, while the melting point of carbide clam is comparable to TaC. Feel free to send an inquiry to get the latest price if you would like to buy Tantalum Carbide TaC Powder in bulk.

Technical parameters of  Tantalum carbide TaC powder
CAS number: 12070-06-3
Tantalum carbide TaC powder True Density: 13.9 g/cm3
Tantalum carbide TaC powder Bulk Density: 2.5g/cm3
Tantalum carbide TaC powder Crystal Structure: Cubic
Tantalum carbide TaC powder APS: 1000 nm (Can be customized)
Tantalum carbide TaC powder SSA: 15 m2/g
Tantalum carbide TaC powder Purity: 99+%
Tantalum carbide TaC powder Solubility in water: insoluble
Tantalum carbide TaC powder Appearance: Black-gray odorless powder
 

 

T.C

F.C

O

N

Al

Fe

Na

Ca

K

Si

>6.32%

<0.08%

<0.3%

<0.003%

<0.004%

<0.042%

<0.003%

<0.003%

<0.004%

<0.003%


Properties and Applications of Tantalum carbide TaC powder:
Tantalum carbide (TaC) is an extremely hard (Mohs hardness 9-10) refractory ceramic material, commercially used in tool bits for cutting tools. The hardness is exceeded by diamond.  
It is a heavy, brown powder usually processed by sintering, and an important cermet material. 
It is sometimes used as a fine-crystalline additive to tungsten carbide alloys. 
Tantalum carbide has the distinction of being the stoichiometric binary compound with the highest known melting point, at 4150 K (3880°C) and boiling point, at 5500 oC. 
The substoichiometric compound TaC0.89 has a higher melting point, near 4270 K (4000°C).

How is Tantalum Carbide TaC Powder produced?
The Tac powder of the desired composition is prepared by adding a mixture of heating and graphite powder in a vacuum or an inert gas atmosphere (argon). The heating was performed at a temperature of about 2000 ° C using a furnace or arc melting. The alternative technology is reduced by carbon tantalum oxide in a vacuum or hydrogen atmosphere at a temperature of 1500-1700 ° C. This method is used for carbonized tantalum in 1876, but it lacks thermometrically controlled control of the product. Direct production TAC is produced directly from the component by self-propagating high-temperature synthesis.
 
Application of Tantalum Carbide TaC Powder:
The main use of tantalum carbide is carbide, capacitors, electronic devices, high-temperature components, chemical equipment and ferrite. Carbides are typically added to tungsten carbide/cobalt (WC / CO) powder wear to enhance the physical properties of the sintering structure.
The tantalum carbide also serves as a grain growth inhibitor to prevent large particles from forming a material to produce an optimum hardness.
It is also used as steel mold coatings in aluminum alloy injection molding. While providing hard, wear-resistant surfaces, it also provides low friction mold surfaces.
Carbides are also used to produce sharp instruments with extreme mechanical resistance and hardness. In addition, tantalum carbide can also be used in the following:
1.Cemented carbide
The tantalum carbide plays an important role in the cemented carbide, which improves alloy properties by improving fibrous tissue and phase transformation kinetics, making alloys with higher strength, phase stability, and processing deformation capabilities.
2. Electronic industry
Natunction not only inherits many advantages of carbide nanomaterials but also has its own unique side. Such as high hardness (normal temperature is 9-10, high melting point (approximately 3880 ° C), Yang's modulus (283-550 GPa), strong conductivity (32.7-117.4 μΩ · CM at 25 ° C in electrical conductivity) ), High-temperature superconducting (10.5k), anti-chemical corrosion candles and heat shock ability, highly catalytic activity of ammonia decomposition and hydrogen separation.
3. High-temperature alloy
In carbide, the melting is preferably a tantalum carbide(TAC) (melting point 3890 ° C) and carbide (HFC) (melting point 3880 ° C), followed by carbide (ZrC) (melting point 3500 ° C). At high temperatures, these materials have excellent mechanical properties, greatly exceeded the best polycrystalline graphite, especially carbonized, is the only material that maintains certain mechanical properties in the temperature range of 2900 ° C-3200 ° C.

Storage Condition of Tantalum carbide TaC powder:
The damp reunion will affect TaC powder dispersion performance and using effects, therefore, Tantalum carbide TaC powder should be sealed in vacuum packing and stored in cool and dry room, the Tantalum carbide TaC powder can not be exposure to air. In addition, the Ti2AlC powder should be avoided under stress.

Packing & Shipping of Tantalum carbide TaC powder:
We have many different kinds of packing which depend on the Tantalum carbide TaC powder quantity.
Tantalum carbide TaC powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Tantalum carbide TaC powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality tantalum carbide powder, please feel free to contact us and send an inquiry. ([email protected])

 

Tantalum Carbide Properties

Other Names tantalum(IV) carbide, TaC powder
CAS No. 12070-06-3
Compound Formula TaC
Molecular Weight 192.96
Appearance Brown to Dark Brown Powder
Melting Point 3850 °C
Boiling Point 4780-5470 °C
Density 14.3-14.7 g/cm3
Solubility in H2O Insoluble
Specific Heat 36.71 J/mol·K
Thermal Conductivity 21 W/m·K
Exact Mass 192.947996
   
   

Hafnium Diboride Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport

In 2021, Russia's palladium, nickel and aluminum exports will account for 24.6%, 21.9% and 9.9% of the global total, respectively. Russia exported 2.819 million tons of palladium, accounting for 43.37% of global Tantalum Carbide powder with low price fluctuation range and excellent quality, click here will be a good choice.

Inquiry us

Copper Forgings: Definition, Characteristics and Key Issues in the Production Process

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

Our Latest Products

Copper Forgings: Definition, Characteristics and Key Issues in the Production Process

Copper forgings are forged products made of copper alloy. Due to its excellent electrical conductivity, thermal conductivity, corrosion resistance and accessible processing properties, copper forgings are widely used in many fields such as electrical…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It is easily soluble when heated alkali is used, but not in water.Particle size: 100mesh Purity: 99.99% About Germanium Sulfide (GeS2) Powder: Germanium Sulfide…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products have good electrical conductivity, thermal conductivity, ductility, corrosion resistance, and wear resistance. They are widely used in electricity, electronics, energy, petrochemical industry. About Metal Alloy 8.92g/Cm3 High Purity…