Vanadium carbonide exhibits good thermal and electrical conductivity. Therefore, it is used extensively in fields such as iron and steel metal metallurgy.
Purity: 99%
Size:325mesh
Vanadium Carbide VC Pulver:
Vanadium carbide
It is an organic compound.
Vanadium carbide
Formula
VC. Black cubic crystals
Vanadium carbide
melting point
is 2810degC
Vanadium carbide
Point boiling
It is 3900°C. The relative density of 5.77. It is slightly more hard than quartz, at 9 to 9.5 Moher. It is the strongest known metal carbide. Vanadium metals, alloys contain vanadium carbide. Vanadium pentoxide can be reduced with coke to make vanadium carbide. This is the main use of vanadium pentoxide in making vanadium steel. These additives can be used to make cemented carbonide.
It is similar in structure to vanadium monooxide, and crystallizes within the rock salt structure. VC and VO can be dissolved in each other, so VC samples often contain oxide impurities. The vanadium dioxide and carbon are heated to make it. It can be made at temperatures of around 1000°C. Although VC can be heated to a temperature of 1000 degrees Celsius, it will convert to V2C when exposed at higher temperatures.
To receive the most current information, send us an inquiry
vanadium carbide price
Please fill out the form below if you wish to
buy Vanadium Carbide Powder
In bulk.
Vanadium carbide VC powder performance :
Vanadium carbide,Chemical formula: VC, Molecular weight 62.95; Carbon content 19.08%; Density 5.41g/cm3 (Melting Point 2800oC), Boiling Point 3900oC). The vanadium carbonide is a gray metallic grinding powder that has a cubical system of NaCl. Crystallization constant is 4.182. It is extremely chemically stable with excellent high temperature properties. The carbide can be used to cut steel and in other industries. Additionally, it can be used to refine the WC cemented crystals to enhance the properties of the alloy.
Vanadium Carbide Powder Technical Parameters
|
ITEM
|
Chemical Composition (%)
|
Particle size
|
|
VC
|
C
|
P
|
S
|
O
|
No Carbon
|
|
VC Powder
|
99
|
19
|
0.03
|
0.05
|
0.4
|
0.2
|
325 mesh
|
How does Vanadium Carbide VC Powder get made?
1.Complete both the vanadium oxide and carbon powder. Carbonized vanadium should be made under very high vacuum conditions.
2.Pure VC may be obtained by the gas phase reaction method. You can make pure VC from hydrogen-containing tetrachloride (VCl4 vapor) and hydrocarbon gases (methane or benzene). It is attached to a tungsten-wire directly and energized in order to heat it. To prevent the formation of metal vanadium in the initial stages of the reaction, the temperature at which the tungsten is heated must not exceed 1400°C. It is then heated to 2000°C to finish the carbonization process. It is gray-white crystalline when the tungsten steel has precipitated.
3.Preparation using metal vanadium. Use the metallic vanadium powder, or the hydrogenated vadium powder, to prepare the mold. Pressurized vanadium will be obtained by mixing the metal with high pressure (3 tons/cm2) This powdered is heated up to 1800 2000 deg C. It is then stored in a graphite container. ).
4. Reduce the amount of carbon powder. You can prepare carbonized vanadium at temperatures of up to 1300°C, or even higher in high vacuum conditions.
Applicaciones
Vanadium Carbide VC Powder:
Vanadium carbide can be used in many different applications. The addition of vanadium carbonide to steel will improve its wear resistance, corrosion resistance as well as toughness, toughness, strength and thermal fatigue resistance. This material can also be used in different types of cutting and wear-resistant equipment.
Vanadium Carbide has been widely utilized as a catalyst for novel hydrocarbon reactions due to its high activity and selectivity.
Vanadium Carbide is also a source of new carbon to produce diamond. Vanadium Carbide's primary role in the fields of cemented carbide, cermet and diamond is to act as a grain inhibitor. It can be used effectively to stop the growth of WC seeds during sintering.
Vanadium carbonide is an additive to cemented carbide. It helps to fine tune the crystals of carbide and increases the hardness in the inserts.
Vanadium Carbide is a useful ingredient in the steelmaking, cemented carbide, and cutting tool industries. It can improve the alloy's properties.
Vanadium Carbide can be used to make wear-resistant and semiconductor films, as well cutting hard alloys.
Storage condition of Vanadium Carbide, VC Powder:
Vanadium carbide VC powder should be kept in a dry, cool environment. It should not be exposed to the air.
Packing & Shipping of Vanadium Carbide VC powder :
You can pack it in two plastic bags with the inside.
Vanadium carbide VC powder packing: vacuum packaging, 100g to 500g or 1kg/bag 25kg/barrel and as per your request
Vanadium carbide VC powder shipping: Once payment has been received, it can be shipped by sea or by air as quickly as possible.
Abbaworld advanced materials Nano Technology Co. Ltd. (Abbaworld), is a trusted global supplier and manufacturer. They have over 12-years of experience in providing high-quality chemical products and Nanomaterials.
Send us an inquiry if you're looking for vanadium carbide powder of high quality. (
brad@ihpa.net
)