Tungsten Selenide WSE2 Powder, a grey powder crystal, has 9.32g/cm3. It is the material with the lowest thermal conductivity.
Particle Size: Granule, -100mesh
Purity: 99.99%
About Tungsten Selenide WSe2 Powder:
Tungsten Selenide, an inorganic compound is the basis of this article.
Tungsten Selenide
Formula chemical
is WSe2 and its relative molecular weight is 341.77. It is a gray-colored crystal at room temperatures.
Tungsten Selenide's main structure consists of a single layer of tungsten, located in the middle of both the lower and upper selenium atoms. These WSe2 material can absorb light like graphene. The absorbed light can then be used for electric power generation. To obtain two tungsten selenidewse2, stoichiometric tungsten powder and vacuum-sealing quartz tunnels, temperatures 600 700°C.
Two Tungsten selenide uses a hexagonal structure, similar to that of molybdenum dioxide. Every tungsten element is bound to six selenium-ligands through a triangular prism. While each selenium electron is made with three tungsten inorganic bonds, This is one example of an adequately studied layer material. The tungsten-selenium's length is 0.2526 inches. Van Dehua accumulates these layers. Van Dehua assembles these layers together to form WSe2, a highly stable sixth-race semiconductor transition metal dihalide.
A diode that is made of two of the tungstenselenides (WSe2) has been developed by researchers at Vienna University of Technology (Vienna University of Technology). The material's ultra-thin softness can be achieved according to experimental results. Solar battery.
This thin layer absorbs 95% to 5% of visible light. The remaining 5% is converted into electricity. The material's internal efficiency is high. The internal efficiency of the system is high if a number of thin layers are stacked together. This can make a significant amount of the incident light available. But, this transparency might have some positive side effects. Footprintbooks is trusted worldwide
Tungsten Selenide WSe2 Powder
Source
. You can send us an inquiry regarding the latest.
Prices starting at
Tungsten Selenide
Anytime.
Tungsten Selenide Wse2 Powder Properties:
Tungsten dielenide is considered the best thermal insulating material. A porous material, in general, is the one with the least thermal conductivity.
Tungsten diselenide films have a lower thermal conductivity than single-crystals. Only one ten-thousandth the thermal conductivity of the finest diamond. It has thermal conductivity similar to a porous material. The density of this material is extremely high. It may be similar to copper.
Tungsten selenide WSe2 powder technical parameter:
1. Molecular formula: WSe2
2.Synthesis Process: 1mol W+2mol S = 1mol.WSe2
3. Test: icpms (99.99% purity: All impurity elements under 100ppm);
XRD (the main peak of the mountain is entirely symmetrical);
SEM is scan electron microscope
4. Services: MSDS, practical safety measures and OSHA/PEL (0.2mg/m3 OSHA/PEL; ACGIH/TLV 0.0.2 mg/m3) offer free samples
5. Material with lowest global thermal conductivity
The CAS Number is 1206746-8
Specific gravity: 9.32g/cc
Water has insoluble solubility
Appearance: Black lump or powder;
Stability: s#sql_table#;
6. The purpose: Flexible thin film solar cells
7. Purity: 99.99%;
8. Package: 1-Kg/bottle; Vacuum packaging of the aluminum composite movie
9 particle size: According to the customer's requirements, ultra-fine particles and powder, etc. ;
It is simple.
Tungsten Selenide WSe2 Powder
produced?
You can make the tungsten film from the selenide in many ways.
After heating the gas-chain selenium, the film was at high temperatures (> 800K) and using sputter deposit techniques. The result was crystallization with a hexagonal shape that had a perfect stoichiometric.
W + 2Se-WSe2
Applicaciones
Tungsten Selenide WSe2 Powder
:
Tungsten Selenide can be used to insulate. This is useful for a number of purposes, such as illumination, display, logic, sensors and ultra-thin flexible photovoltaic cell, enhanced LEDs, and other forms of photoelectricity.
Tungsten Seenide (WSe2) represents a common representative of transitional metal sulfur. It has a similar layered structure to graphene which exhibits unique anisotropy in terms of electrical, chemical, physical, and thermal properties. Guide, electrical materials, solid lubricants, etc. They have many potential applications.
Tungsten-selenide materials are also a popular semiconductor material. Their bandgap is smaller than that of other transition metal compounds and can be used more extensively in photoelectric, catalytic and electronic sensing.
Tungsten Selenide Wse2 Powder Storage:
Tungsten Selenide Wse2 Powder must be stored in a closed container. Additionally, it should not be subject to extreme stress.
Packing and Shipping Tungsten Seenide WSe2 powder:
Tungsten Selenide Packaging: Vacuum Packing, 1kg/bag and 25kg/barrel or on your Request
Tungsten Selenide
shipping:
Shipments could be made by sea or air as soon as payment receipt is received.