High Purity Titanium Silicide TiSi2 Powder CAS 12039-83-7, 99.5%

Recently, the EU proclaimed new sanctions on Russia, including coal, timber, rubber, cement, and fertilizer, as well as high-end seafood TiSi2 Powder.

About Titanium Silicide TiSi2 Powder:
With the rapid development of large integrated circuits (ULSI), the size of the equipment and equipment is getting smaller, the requirements for equipment size, film quality, and thickness uniformity are getting higher.
At present, the wire width of the semiconductor device has been reduced to less than 0.1 μm, so it is impossible to obtain a continuous conductor having a low resistance during the original process.
New materials, new processes, and new deposition systems must be found to improve or replace aluminum and heavy-doped polysilicon for circuit metallization.
In these new materials, metal silicon having high conductivity and high-temperature stability has increasing interest, compatible with the current microelectronic manufacturing process. Titanium Disilicide has low resistivity, high temperature and good stability.
In a commonly studied metal silicide (such as TSI2, Nisi, Cosi2, WSI2, Tasi2, MOSI2), silicide (Tisi2) has ideal characteristics: high conductivity, high selectivity, good thermal stability, good SI Adsorption, good process adaptation of silicon adaptive connection parameters. Therefore, in the integrated circuit device, titanium silicide is widely used to produce a metal oxide semiconductor (MOS), a metal oxide semiconductor field-effect transistor (MOSFET) and a dynamic random access memory (DRAM) gate, source/leakage, mutual contact ohm. Feel free to send an inquiry to get the latest price if you would like to buy Titanium Silicide TiSi2 Powder in bulk.

Characteristics of Titanium Silicide TiSi2 Powder:
Titanium silicide TiSi2 powder (CAS 12039-83-7) has a high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy systemthe intermediate phase.

Technical Parameter of Titanium Silicide TiSi2 Powder:

Product Name MF Purity Particle Size Melting Point Density Color
titanium silicide TiSi2 99% 5-10um 1620℃ 4.0 g/cm3 black


Chemical Composition of Titanium Silicide TiSi2 Powder:

TiSi2 Ti Si C P Fe S
>99% 46.32% 52.5% 0.02% 0.02% 0.19% 0.01%


How is Molybdenum Silicide MoSi2 Powder produced?
Di silicide can be obtained from the reaction between titanium or hydride and silicon.
Ti + 2 Si → Tisi2
Aluminum heat can also be performed by the ignition of aluminum powder, sulfur, silica and titanium dioxide or hexafluoritititoetice, by electrolysis of hexafluoride titanate and titanium dioxide, or through tetrachloride reaction.
Another method is to react with titanium tetrachloride to silane, dichloronilane or silicon.
TiCl4 + 2 SiH4 → Tisi2 + 4 HCl + 2 H2
TiCl4 + 2 SiH2Cl2 + 2 H2 → Tisi2 + 8 HCL
TiCl4 + 3 Si → Tisi2 + SiCL4
 
Applications of Molybdenum Silicide MoSi2 Powder:
Titanium silicide is used in the semiconductor industry. It is typically grown by means of salicide technology over silicon and polysilicon lines to reduce the sheet resistance of local transistor connections. In the microelectronic industry, it is typically used in the C54 phase.
1. Silicide Titanide is low, the melting point is high, and the chemical properties are stable, and there is a broad use prospect in the microelectronics field.
2. Aerospace industry, ship submarine manufacturing, medical, jewelery manufacturing.

Packing & Shipping of Titanium Silicide TiSi2 Powder :
We have many different kinds of packing which depends on the titanium silicide TiSi2 powder quantity.
Titanium silicide TiSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Titanium silicide TiSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

 

Titanium Silicide Properties

Other Names TiSi2 powder, titanium disilicide
CAS No. 12039-83-7
Compound Formula TiSi2
Molecular Weight 104.04
Appearance Black Powder
Melting Point 1470 °C
Boiling Point N/A
Density 4.02 g/cm3
Solubility in H2O N/A
Exact Mass 103.9018
   
   

Titanium Boride Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A

New Delhi: India's Oil Ministry recently conveyed its intention to five national oil companies including Indian Oil Corp and Bharat Petroleum Resources LTD to assess the possibility of buying shares in Russian oil projects sold by European and American oil majors.  

Bp announced it would give up its 19.75% stake in Rosneft, the Russian oil company.  ExxonMobil said on March 1 that it would exit about $4 billion in assets and terminate all of its Russian operations, including the Sakhalin-1 project in Russia's far East.  

India's oil ministry has asked the overseas investment arm of India's Oil and Gas Corporation to consider buying ExxonMobil's 30 percent stake in the Sakhalin 1 project in Russia's far East. ExxonMobil is the operator of the project and Indian companies already have a 20 percent stake in the project.

Because of the ever-changing international situation, the supply and prices of international bulk TiSi2 Powder are still very uncertain.

Inquiry us

Our Latest Products

Metal Alloy High Purity Tungsten Crucibles

About Metal Alloy High Purity Tungsten Crucibles:Chemical composition:…

Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles

About Metal Alloy Vacuum Coating Tungsten Melting Pot Tungsten Crucibles:Chemical composition:…

Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets

About Metal Alloy Fine Surface 19.15g/cm3 Tungsten Targets:Chemical composition:…

0086-0379-64280201 brad@ihpa.net skype whatsapp