Zirconium-boride has a molecular formula ZrB2. In nature, grey hard crystals. Zirconium Boride has three main components: zirconium Monoboride, zirconium Diboride, and Zirconium Triboride. Purity>99%
Particle Size : 325 Mesh
Zirconium Diboride, ZrB2 powder:
Zirconium-boride, is a chemical compound.
Zirconium-boride's chemical formula ZrB2 is. Nature gray hard crystals. Three components make up zirconium boride:
monoboride,
diboride, and
tribromide. Only zirconium Diboride can be stable across a large temperature range. The main industrial production relies on zirconium.
Zirconium dioxide comes in hexagonal or gray crystals, powders, and has a melting temperature of 3040degC. High-temperature resistant, high strength in both room temperature and at high temperatures. Low resistance, high resistance, and anti-oxidation. Melting point of about 3000degC. Metallic luster.
Zirconium boride ZrB2 consists of a highly covalent ceramic material that has a hexagonal structure. ZrB2 is a high-temperature ceramic with a melt point of 3246degC. With a density of only 6.09 g/cm3 and a high temperature strength of over 1800degC (measured density may be higher because ha impurities are present), it is ideal for high-temperature aerospace application, such as hypersonic or rocket propulsion.
The diboride ceramics and titanium diboride share the same structural characteristics. ZrB2 has a high thermal conductivity of >50 W/m/K, is inert to molten steel, and can withstand thermal shock.
ZrB2 components are typically hot-pressed by applying pressure to the heated material and then machining to shape. ZrB2 is unable to sinter due to the covalent properties of the material, and the surface oxides. Surface oxides cause the crystal grains to be coarser, before they become denser during the sintering. ZrB2 may be sintered without applying pressure. Sintering additives like boron-carbide and carbon will react to surface oxides in order to increase the driving force.
Please send us an email to receive the most recent
zirconium dioxide price. If you're interested in purchasing Zirconium Difboride Powder by bulk, please feel free to do so.
Properties Of Zirconium Diboride Powder ZrB2 Powder CAS 12045-64-6
Molecular Formula: ZrB2
Molar mass: 112.85 g/mol
Appearance: grey-black powder
Density: 6.085 g/cm3
Melting point: 3246 degC
Insoluble: Solubility of water
Hexagonal crystals: hP3
Space group: P6/mmm No. 191
Zirconium Diboride ZrB2: Features
TiB2, ZrB2, HfB2, VB2, NbB, NbB2, TaB, TaB2, CrB2, Mo2B5, W2B5, Fe2B, FeB, CoB, Co2B, NiB, Ni2B, Ni2B, LaB6, UB4, UB2.
Zirconium diboride is a highly covalent ceramic material that has a hexagonal structure. ZrB2 is a ceramic ultra-high temperature (UHTC), with a melt point of 3246°C. The combination of its low density, 6.09g/cm3, and high temperature strength make it a good candidate for aerospace applications involving high temperatures such as hypersonic flights or rocket propeller systems. It is a ceramic with unusually high thermal conductivity and electrical conductivity. These properties are shared by isostructural hafnium dioxide and titanium diboride.
How are Zirconium Diboride Powder ZrB2 Powder manufactured?
By metal thermal reduction, ZrO2 or HfO2 is reduced to respective diboronsilanes. Use inexpensive precursor materials, and react in accordance with the following reactions.
ZrO 2 + B 2 O 3 + 5Mg-ZrB 2 + 5MgO
The materials required for the stoichiometric reaction and thermal boron reaction (ZrO2 / TiO2 / HfO2 and B4C) are more expensive. Prepare ZrB2 for at least one hour at a temperature greater than 1600degC by the following reaction
2ZrO2 + b 4 C + 3C-2ZrB2
This method is required to have a slight surplus of boron as some boron gets oxidized by the boron-carbide reduction process. ZrC was also produced by the reaction. However, when the reaction was carried out with an excess of 20-25% B4C the ZrC phase disappeared and only ZrB2 remained. UHTC produced at the lowest synthesis temperatures (1600degC), will be of finer dimensions with better sinterability. To promote oxide reduction and diffusion, boron carbide must be ground prior to boron-carbide reduction.
You can disperse ZrO2 on the polymer precursor to boron carbide before reaction. in. Heat the reaction mixture up to 1500degC to form boron carburide and carbon, followed by the reduction of ZrO2 into ZrB2.
If the substrate temperature is greater than 800degC the gas phase is used for the reduction of the zirconium-boron-tetrachloride vapors. Recent developments have allowed alternative ZrB2 layers to be produced by physical vapor deposit.
:
Zirconium is diboride, which has high hardness and thermal conductivity. Zirconium is used for refractory ceramics, the aerospace and military industries, nuclear industries, and special ceramics. Zirconium can be used for a surface coat on rolling balls and solid materials.
Carbon fiber reinforced zirconium boride composites have a high density. Silicon carbide fiber-reinforced composites of zirconium boride are brittle, and they show catastrophic damage.
Zirconium diboride can be used in thin-film electronics for sensors and actuators that operate at high temperatures. This is because ZrB2 has a metal like conductivity, with a melting temp of 3245degC.
Zirconium Diboride ZrB2:
The zirconium dioxide powder is used for the manufacture of ceramic materials.
(2) Zirconium diboride can be used as neutron absorber.
Use zirconium powder as a coating that is resistant to abrasion.
The zirconium dioxide powder is suitable for use as a crucible liner and in anticorrosive chemicals.
As an antioxidation material, zirconium powder diboride can be used.
(6) Zirconium Diboride Powder can be used to make refractory materials, in particular for the anticorrosion status of molten metallic alloys.
(7) Zirconium Diboride Powder can be used to enhance the thermal performance of an additive.
Use zirconium-diboride powder for high-temperature resistance.
(9) Zirconium diboride can be used in a special dope to protect against corrosion, high temperatures and oxidation.
Store Zirconium Diboride Powder ZrB2 in the following conditions:
The ZrB2 ZrB2 is affected by damp reunion. Therefore, it should be packed in vacuum and kept in a dry and cool room. ZrB2 Powder should not be exposed to stress.
Shipping & Packing of Zirconium Diboride ZrB2:
The packaging depends on the amount of zirconium dioxide ZrB2 powder.
Zirconium diboride ZrB2 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Zirconium Diboride ZrB2 shipping: can be shipped out via air, sea or express as soon as payment receipt.
Technology Co. Ltd., () is an established global chemical material manufacturer and supplier with over 12 years' experience in the production of high-quality nanomaterials. These include boride powders, graphite or nitride particles, as well as sulfide and boride powders for 3D printing.
We are happy to answer any questions you may have. (
brad@ihpa.net)