Concrete Admixtures

Air Entraining Agent in Concrete

January 4,2023
Updated 10:31 am

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The ability to inject large numbers of small air bubbles throughout concrete mixers, to decrease bleeding, segregation, workability, and improve overall concrete quality, is known as an "air-entraining agent".

Description An Air Training Agent Air-entraining agent The ability to mix concrete with a lot of tiny, evenly distributed air bubbles. It helps to decrease the amount of bleeding and segregation. concrete mixture It will increase workability, as well as significantly improving the resistance to frost and endurance of hardened. concrete admixtures .

What's an air entraining device?
The vast majority Air entraining agents These are anionic surfactants. At the water-air interface the hydrophobic groups is directed toward the air. The hydrophobic layer of hydrated particles is formed when the concrete mixture is mixed. The directional adsorption layers of these air bubbles are the same as their charge. They repel one another and can be evenly distributed.
The anionic air-entraining substances can also be used to prevent bubbles bursting. They are absorbed onto the bubble film by calcium salt precipitation, which is found in high calcium cement.

Technical Parameters of the air entraining agents

Articles

Main component

Appearance

Density(g/cm3)

pH (1 % water solution).

viscosity(20,Sp2,100rpm)

Standard

Surfactant for alkyl ether anionics

You can choose from colorless or yellowish liquid

1.03+-0.02

6.0-8.0

1.21~1.48

300-1500

Characteristics of an air entraining agent
1. You will be amazed at its remarkable properties of fine, consistent and long lasting air bubbles.
2. Concrete can be made more workable and easier to pump.
3. This inhibits water secretion and segregation.
4. Enhances resistance to freeze-thaw and durability.
5. Reducing slump losses
6. You can use it to make concrete for any type of project, such as hydraulic, highway, port or marine.
7. This mortar is compatible with different types of mortars.

Use of concrete air entraining agent
1. Increase the usability of concrete mixes.
2. Significantly increase the concrete's frost resistance and impermeability.
3.Reduce concrete strength. Concrete's strength is affected by its air content. This means that concrete with a higher compressive strength of 1% will shrink by between 4% and 6%. Also, it will have a decrease in its strength for flexural purposes by about 2% to 3.3%.

Be aware Agent for air entraining
1. This product is not toxic and innocuous, it can be biodegradable. However, it cannot be eaten.
2. You should rinse it off with lots of water if it gets in your eyes.
3. A doctor should be consulted immediately if allergies are caused to any portion of the human body.

Inquiry us

tags
Air Entraining Agent in Concrete

PREVIOUS NEWS

Sodium Hexametaphosphate

NEXT NEWS

Sodium Tripolyphosphate STPP

HOT PRODUCTS

Sales Manager:

Amy
15+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

Sales Manager:

Aimee
14+ years of experience
Over $50+ million in sales

Customer response rate:

99%

Customer review:

Highly satisfactory

E-mail:brad@ihpa.net

Telephone:0086-0379-64280201

Newsfluffylogic

Concrete Admixtures

Air Entraining Agent in Concrete

Sodium Hexametaphosphate

Sodium Tripolyphosphate STPP

Copper Forgings: Definition, Characteristics and Key Issues in the Production Process

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Colloidal Silver Nano Silver Solution CAS 7440-22-4

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity 3D Printing 304 Stainless Steel Powder

Chromium Sulfide Cr2S3 Powder CAS 12018-22-3, 99.99%

Quick Reviews

Sales Manager:

Customer response rate:

Customer review:

Sales Manager:

Customer response rate:

Customer review:

Contact Us

Our Latest Products

Copper Forgings: Definition, Characteristics and Key Issues in the Production Process

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Popular Topics: