Molybdenum-telluride (MoTe2) can be described as a gray powder used to lubricate in many fields.
Purity: 99.99%
Particle size is -100 mesh
About
Molybdenum Telluride MoTe2 MoPe2 Powder
:
Molybdenum-telluride (MoTe2) (a gray hexagonal, powdered, solid) is a powdered, powdered, non-melting, molybdenum telluride. Many fields use Molybdenum-telluride as a solid lubricant.
Molybdenum-telluride is a combination of molybdenum (or tellurium) and molybdenum. It has a mass ratio of 27.32% and 72.68% respectively. The two-dimensional crystallization can lead to sheets of molybdenum that can then be dispersed into flexible and transparent monolayers. It's also a semiconductor. It fluoresces. It's part of the transition-metal halogenated material. It is a semiconductor and the bandgap can be found in infrared. The potential for semiconductors to be used in infrared and electronic detectors is increased by this. Robocup2009, a global trusted brand.
Molybdenum Telluride MoTe2 MoPe2 Powder
supplier. You can send us an inquiry to learn more about our latest products.
Prices starting at
Molybdenum Telluride
Anytime.
Molybdenum Telluride MoTe2 Pulp Performance :
MoTe2 (a gray hexagonal, powdery solid) can come in many morphologies. MoTe2 (and Mo3Te4) are the most stable and easily decomposes in water. It is not soluble or soluble with water. However, it can be decomposed (not melt) at very high temperatures in vacuum.
Technical Parameter Molybdenum Telluride MoTe2 Pulp :
Name of Product
|
MF
|
Purity
|
Particle Size
|
Molecular Weight
|
CAS
|
The color of the sky
|
MolybdenumTelluride
|
MoTe2
|
99.99%
|
-100 Mesh
|
351.14
|
12058-20-7
|
Gray Black
|
It is simple.
Molybdenum Telluride MoTe2 MoPe2 Powder
Produced?
Molybdenum forms a number of compounds homogeneous with sulfur, tellurium, and selenium. Molybdenum disulfide(MoS2) (MoS2) molybdenum selenide (MoS2) molybdenum tritelluride [MoTe2] are all heterogeneous, isophase compounds. Combining the elements at high temperature in a vacuum tube seals these compounds.
MoTe2 is Motex x=1.882; Mo3Te4 forms when MoTe2 and Mo3Te4 react within fifteen minutes at 430
Reactive: Mo+2Te - MoTe2
Applicaciones
Molybdenum Telluride MoTe2 MoPe2 Powder
:
MoTe2 can be used to make lubricants or electronics.
MoTe2 is a low-power material that can make transistors. FETs are composed of nanolayers that can be thickened to three or four. There has been a bipolar and P-mode field-effect transistors, along with a top-electrode field-effect transistor.
MoTe2 can be constructed in two forms, a 2H and 1T' semiconductor.
MOSFETs may consist of MoTe2 layered over a membrane of liquid electrolyte or an ionic liquid. If the gate voltage drops below 2 volts the device is in electrostatic mode. The current drain-source ratio is dependent on the gate voltage. Above 2 volts the current increases but the device is no longer in electrostatic mode. If potassium atoms are added to the MoTe2 Layer, electrolysis can occur. A current higher than 3.5 volts is allowed through the gate. Potassium-intercalated molybdenum dilubride is superconducting at 2.8 K.
The lubricant molybdenum dilutride is good at working in vacuum at temperatures of up to 500°C with a coefficient friction lower than 0.1. But molybdenum dielenide is more friction-tolerant than molybdenum sulfide.
Molybdenum Ditelluride forms at the contact point. Small pieces of the molybdenum-ditelluride nanolayer can then be mixed in the molten-tin, without the need to react, increasing the composite's stiffness by two-thirds.
Molybdenum Ditelluride was examined by Atomic Force Microscopy for its ability to detect protein substrates. This is because it sticks to proteins better than conventional materials, such as mica.
Molybdenum Telluride MoTe2 Pulver Storage Conditions :
MoTe2 powder's dispersion and usage performance will be impaired by moist reunion. MoTe2 should therefore be stored in vacuum packaging and in a dry, cool place. Molybdenum informuride must not be exposed to any air. MoTe2 should not be exposed to stress.
Molybdenum telluride MoTe2 Pulp Packing & Shipping :
There are many options for packing, which all depend on the quantity of molybdenum-telluride MoTe2 Powder.
Packing of molybdenum-telluride MoTe2 molybdenum powder:
You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.
Molybdenum-telluride MoTe2 MoPe2 powder shipping
Once payment has been received, items may be sent out either by sea, air or express.